tcpdump is used for packet analyzer which allows the user to intercept and display TCP/IP and other packets being transmitted or received over a network to which the computer is attached.
Installation of tcpdump on Solaris/Linux:
pkgutil is similar utility for Solaris compared to yum in Linux and apt-get in Ubuntu.
First let's install pkgutil using following command:
/usr/sfw/bin/wget http://mirror.opencsw.org/opencsw/pkgutil.pkg
pkgutil install at /opt/csw/bin/pkgutil on Solaris
Use below command to install tcpdump on Solaris:
pkgutil -i coreutils [This installs tcpdump at /usr/sbin/tcpdump]
Usage of tcpdump:
tcpdump -w [output-file] -i [physical-interface] port [port]
I noticed that capturing of the packets is only limited to 96 bytes. Checking manual of tcpdump I found that there is an option to disable the 96 bytes limitation by using the option "-s 0".
Use the following command to capture 65535 bytes of packets.
tcpdump -w [output-file] -i [physical-interface] port [port] -s 0
Example: tcpdump -w p001.pcap -i eth0 port 8080 -s 0
The above command captures any packet transfered on "physical-interface" on port 8080.
Analysis:
The output file can be analyzed using "Wireshark" GUI application available for free.
Installation of tcpdump on Solaris/Linux:
pkgutil is similar utility for Solaris compared to yum in Linux and apt-get in Ubuntu.
First let's install pkgutil using following command:
/usr/sfw/bin/wget http://mirror.opencsw.org/opencsw/pkgutil.pkg
pkgutil install at /opt/csw/bin/pkgutil on Solaris
Use below command to install tcpdump on Solaris:
pkgutil -i coreutils [This installs tcpdump at /usr/sbin/tcpdump]
Usage of tcpdump:
tcpdump -w [output-file] -i [physical-interface] port [port]
I noticed that capturing of the packets is only limited to 96 bytes. Checking manual of tcpdump I found that there is an option to disable the 96 bytes limitation by using the option "-s 0".
Use the following command to capture 65535 bytes of packets.
tcpdump -w [output-file] -i [physical-interface] port [port] -s 0
Example: tcpdump -w p001.pcap -i eth0 port 8080 -s 0
The above command captures any packet transfered on "physical-interface" on port 8080.
Analysis:
The output file can be analyzed using "Wireshark" GUI application available for free.
No comments:
Post a Comment